![](https://mrstacky.com.au/wp-content/uploads/2017/09/collage-of-commercial-gardens-with-mr-stacky-1-1-1.webp)
![](https://mrstacky.com.au/wp-content/uploads/2017/11/general7b-1.webp)
- Follow this simple guide to grow seedlings
- Sow at least 5-10 seeds per seedling cube. (You’ll later pinch off the weakest seedlings)
- For Cos and Iceburg varieties, pinch off the weakest seedlings leaving 1 seedling per mesh pot for best results. (These varieties need at least 7 inches between plants).
- For Loose leaf varieties, leave between 3 to 10 seedlings per mesh pot. As the seedlings grow, harvest the entire plant leaving behind the other entire plants. This way, you’re allowing 1 or 2 plants to fully mature in each pot.
- Place your lettuce in each of the Mr Stacky pockets
- Ensure the lettuce receives full sun in winter (min 4 hours direct sunlight) and in summer a maximum of 4 hours and preferably morning or afternoon light. Lettuce is a cool weather crop, so long days and hot summer temperatures can cause the crop to “bolt” or go to flower.
- The nutrient solution should not be too concentrated for lettuce. An EC of 1.2 – 1.9 is best.
- Within 1 week, you should start to see roots shooting out through the bottom of the mesh pot or seedling tray.
- The root systems of lettuce are shallow and do not require very much space. For this reason the medium planters are more than adequate for all varieties of lettuce.
![](https://mrstacky.com.au/wp-content/uploads/2018/09/Amazing-tower-of-lettuce-1.webp)
- The ideal water temperature for hydroponic lettuce is between 20 to 25 degrees celcius. If the water temperature gets too high, the nutrient solution will not hold enough dissolved oxygen, but if the temperature is too low, the metabolism of the roots is slowed down and plant growth can stall.
- Just a simple inspection for any creepy crawlies is all that’s needed every couple of days….
- Bugs that chew on your lettuce are often a symptom that your plant is not as happy as it could be. Bugs are attracted to stressed plants. You’ll notice that a healthy plant will simply not get attacked like an unhealthy plant will. A plant that is being attacked just tells you it’s not getting the right amounts of sunlight, water, nutrients or oxygen to the root zone.
- pH control is also important for hydroponic lettuce production. Good news is that with a drain to waste system, testing the PH often, is not as necessary. This is because you’re constantly giving fresh water, instead of recirculating systems.
- To test the PH is easy with any pool PH testing kit. A slightly acidic pH range of 5.8-6.4 is recommended, with 6.0 as a good target pH. If the pH is too high (alkaline), use a pH Lower solution containing a mild acid. If the pH is too acidic, use a pH Raise solution containing a mild base such as potassium
![](https://mrstacky.com.au/wp-content/uploads/2017/09/P1030209-1.webp)
![lettuce](https://mrstacky.com.au/wp-content/uploads/2017/09/17437823_171813076664421_5032783282350063616_n-1.webp)
![](https://mrstacky.com.au/wp-content/uploads/2023/11/21911208_239427843250116_5371726081122369536_n-3-1-819x1024.jpg)
About the Author
Mr Stacky is the leader in Tower Garden Systems in Australia, specializing in commercial hydroponic farming, urban farming & residential vertical gardening.
Find out how he can help you achieve your food production goals. Contact Brian